SHOOB Aerial Work Platform Hydraulic Insulation Operation Truck SCS5040JGKJX/Right-Hand-Drive Platform Working Truck

• Customization: Available
• After-sales Service: /
• Warranty: /
• Model NO.: SCS5040JGKJX Aerial Work Truck
• Certification: ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE
• Emission Standard: Euro 4
• Hoesrpower: 251-350hp
• Payload: 20T
• Fuel: Diesel
• Transmission Type: Manual
• Drive Wheel: 6x4
• Condition: New
• Product Name: High-Altitude Operation Truck
• Keywords: Aerial Work Truck
• Model: SCS5040JGKJX
• Drive Type: 4X2
• Wheelbase: 3360 mm
• Front Track: 1385 mm
• Rear Track: 1425 mm
• Total Mass: 4.495 T
• Body Length: 5.995 m
• Body Width: 1.9 m
• Body Height: 2.85 m
• Front Overhang/Rear Overhang: 1.065 / 1.57 m
• Maximum Horsepower: 115 HP
• Maximum Output Power: 85 KW
• Tire Specifications: 7.00R16LT 8PR,7.00R16LT 10PR
• Transport Package: Standard Shipping Packaging or Customized
• Specification: 5.995 X 1.9 X 2.85 m
• Trademark: Leapmotor
• Origin: Hujian, China
• HS Code: 87038000
• Production Capacity: 800 Pieces/Year

Product Description

SHOOB Aerial Work Platform Hydraulic Insulation Operation Truck SCS5040JGKJX/Right-Hand-Drive Platform Working Truck

Product Description

Aerial Work Truck

An aerial work truck refers to a special vehicle that transports workers and equipment to the site and performs aerial work. Aerial work trucks are also called mobile lifting work platforms, which are usually used for temporary and flexible maintenance, construction work, fire evacuation, and other purposes, which are different from permanent equipment such as elevators. The workload is relatively small, usually not more than 1 ton, which is different from cranes. The working surface used for under-bridge maintenance is lower than the road surface where the work platform vehicle is located.

As a special type of work vehicle, aerial work trucks can generally be divided into four basic forms according to the form of their lifting mechanism: telescopic arm type (straight arm type), folding arm type (crank arm type), vertical lifting type, and mixed type. Further classification can be divided into scissor-type aerial work trucks, self-propelled hydraulic lifting platforms, telescopic arm aerial work trucks, crank arm aerial work trucks, cylinder aerial work trucks, etc.

The hydraulic chassis of the aerial work platform vehicle is a self-propelled aerial work platform vehicle with completely independent intellectual property rights. It adopts technologies such as electromechanical and hydraulic integration, reliability design, and computer-aided design, and successfully develops a fully hydraulically driven, self-propelled special chassis, breaking through the previous limitation that domestic aerial work platform vehicles can only be modified and designed with automobile or crane chassis.

According to the form of its lifting mechanism, it can generally be divided into four basic forms: telescopic arm type (straight arm type), folding arm type (curved arm type), vertical lifting type, and mixed type, as shown in the figure.

Structural Characteristics Of Different Types Of Aerial Work Truck

Cranked arm (folding arm) aerial work vehicle: 
The arm is composed of an upper arm and a lower arm, and the working bucket is balanced by a pull rod, which can cross obstacles for aerial work. It has a compact structure, flexible steering, relatively simple functions, and convenient maintenance.

Straight-reaching aerial work vehicle: 
It adopts a multi-stage telescopic arm, a high working height (14~43m), a large working range, a small overall size of the vehicle, and a fast speed to reach the working point.

Hybrid aerial work vehicle: 
It adopts a combination of a crank arm and a straight extension or a double crank arm and double telescopic form, which is suitable for working conditions with a certain degree of difficulty in crossing.

Scissor-type aerial work vehicle: 
It adopts a scissor-type horizontal mechanical structure. The lifting platform has good stability after lifting, and the working platform is wide, which can accommodate several people working at the same time. It is suitable for occasions with compact space and a large working bucket carrying capacity.

 

Product Parameters

AERIAL WORK TRUCK
Product Name	High-Altitude Operation Truck
Keywords	Aerial Work Truck
Model	SCS5040JGKJX
Drive Type	4X2
Wheelbase	3360 mm
Front Track	1385 mm
Rear Track	1425 mm
Total Mass	4.495 T
Body Length	5.995 m
Body Width	1.9 m
Body Height	2.85 m
Front Overhang/Rear Overhang	1.065 / 1.57 m
Vehicle Weight	4.17 T
Maximum Horsepower	115 HP
Maximum Output Power	85 KW
Displacement	2.8 L
Number Of Gears	5 Gear
Tire Specifications	7.00R16LT 8PR,7.00R16LT 10PR
Number Of Tires	6
This Parameter Ls For Reference Only. The Actual Vehicle Configuration Shall Be Subject To The Actual Vehicle In The Store.

Detailed Photos

Emergency Flameout Device

The hydraulic and electrical control systems of the double-row seat folding three-section boom aerial work vehicle are equipped with various limit devices and engine emergency flameout devices. In case of a fault, the power supply is automatically cut off or the engine is stopped to ensure safety. The electric operating system uses a waterproof switch to avoid water ingress, rust and leakage of the switch.

Safe And Reliable

The main aim of the double-row aerial work vehicle is equipped with a lifting structure (limited to one ton), and the upper arm, lower arm, slewing, and lifting hydraulic systems are all unique step-less speed regulation systems, which are energy-saving and flexible, stable, safe and reliable.

Working Scope

The double-row seat folding three-section boom aerial work vehicle is widely used in electrical line maintenance, street lamp maintenance, aerial cleaning, landscaping, electricity, communications, street lamps,highways, cable TV, shipbuilding, construction, gardening, advertising, photography, large enterprises, and other industries.

Outriggers

The outriggers are separate and adjustable, which can achieve the leveling of the whole vehicle on a flat road.

Power Take-off Device

It consists of an oil pump, a power take-off, an electrical control switch, and a pneumatic solenoid valve. It is connected or disconnected by the power take-off clutch electrical switch installed in the car cab so that the power take-off gear engages or disengages with the power take-off output gear in the car gearbox, thereby making the oil pump work or stop. (Note: When the car is driving, the power take-off gear in the power take-off should be disengaged and the oil pump does not work)

 

Cai Body Display

FAQ

Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer with over 40 years of experience in research and development, design, and manufacturing in China.

Q 2: How long is the delivery time for bulk orders?
A4: It depends on the order quantity. Generally, the delivery time is 15 to 40 working days. Please contact us before placing an order.

Q3: Do you provide OEM/ODM services?
A4: Yes, we accept OEM/ODM.

Q4: Can I customize transportation vehicles of various models?
A4: Yes. We have the most advanced modern production equipment and manufacturing processes. We can make products according to your special requirements.

Q5: How do you guarantee quality?
A5: Yes. We strictly control the quality of raw materials and finished products according to the ISO9001 quality control system. We guarantee that all products are 100% qualified.

Q6: How will you deliver my order?
A6: Generally, different shipping methods are adopted according to the quantity, volume, and weight of the order. For orders weighing 1 to 200 kilograms, we recommend air freight. For bulk orders, we will ship by sea. It depends on the specific situation. We will compare and find the best solution.

07: What's your MOQ?
A7: One Unit Trailer or Truck.