SHOOBB Road Maintenance Vehicle 6X4/HZV5251TCXD6ZL Right-Hand Drive Heavy Duty Snow Removal Truck
Snow Removal Truck
Snow removal trucks are also called working road maintenance trucks. They have multiple functions of maintenance trucks: dust reduction, cleaning, and green irrigation. Especially in winter, when removing snow, the tank body is divided into a self-melting chamber, so that the snow melting agent can melt into a solution in the tank body for spraying and melting snow, saving a lot of costs in the past to build a melting pond. Snow removal trucks usually use the chassis of a dump truck as the basis, and are modified with special snow removal equipment. In addition, the vehicle can also quickly select equipment such as snow pushers, ice breakers, front roller brushes or spreaders according to the snow conditions on the road. The replacement between various equipment is convenient and fast, and can be completed without any lifting equipment. Government agencies use smaller vehicles to clear snow from sidewalks, paths and bicycle paths. Management agencies and contractors responsible for road maintenance in temperate or polar regions often have several snow removal trucks, so that they can be used during the winter to ensure the removal of ice and snow on the road and the safety of driving.
Airports use snowplows to clear ice and snow from aircraft surfaces, runways, and taxiways because, in addition to endangering aircraft takeoff and landing, ice and snow can also interfere with the aerodynamics of aircraft.
Working Principle Of Snowplow
It is mainly composed of a prime mover, transmission device, snow collecting device, snow throwing device, travel system, and operating system. The prime mover can be a motor or an engine, and most of them are gasoline or diesel engines at present; the snow-collecting device is used to collect snow, mainly using a snowplow or a spiral auger; the snow-throwing device throws the collected snow to one side of the road or into the collection device. There are two main ways: snow throwing impeller and blower; the travel device is used to realize the forward movement of the machine, which is hand-push type and self-propelled type; the operating device mainly controls the operation and direction of travel of the equipment. When working, the prime mover provides power, and the power is transmitted to the working part and the travel system through a worm gear drive or a belt drive. The snow is collected into a cavity by the snow-collecting device and then removed from the body by the snow-throwing device. The snow-throwing impeller uses the centrifugal force of high-speed rotation to throw the snow; the blower uses airflow to blow the snow out. In this way, under the manpower push (hand push) or prime mover drive (self-propelled), the Hebei Wuxing Electric Power Equipment Co., Ltd. snowplow keeps moving forward, which can achieve continuous snow accumulation and effectively save manpower and material resources.
Product Parameters
| SNOW REMOVAL TRUCK |
| Product Name |
Road Snow Removal Truck |
| Keywords |
Snow Removal Truck |
| Model |
HZV5251TCXD6ZL |
| Drive Type |
6 X 4 |
| Wheelbase |
4325 + 1350 mm |
| Body Size |
10.49 X 2.55 X 3.41 m |
| Front/Rear Overhang |
1.5/1.835 m |
| Total Mass |
25 T |
| Rated Load |
6.82 T |
| Front Track |
2022 mm |
| Rear Track |
1860/1860 mm |
| Number Of Cylinders |
6 cylinders |
| Displacement |
10.518L |
| Maximum Output Power |
268 kw |
| Maximum Horsepower |
360HP |
| Spreader Effective Volume |
7-12 m3 |
| Average Operation Speed |
60 km/h |
| Spreading Width |
2 -22 m |
| Spreading Density |
Snow Melting Agent 5~280g/m2 / Sand 30~350g/m2g/m2 |
| This Parameter Ls For Reference Only. The Actual Vehicle Configuration Shall Be Subject To The Actual Vehicle In The Store. |
Detailed Photos
Improve Operating Power
The operation of the entire system of the snowplow is completely carried out in the cab. The lifting, left and right deflection, cleaning, and other operations of the roller brush are realized through buttons, which greatly improves the operating power.
Bidirectional Swing Function
The roller brush has a bidirectional swing function. The hydraulic drive can realize the left and right swing of the snowplow. The swing angle can be adjusted within the range of 0 ~ 30, thereby changing the snow-sweeping direction.
Good Cleaning Effect
During the cleaning operation, the snowplow can adjust the roller brush by 30 degrees left and right by rotating the oil cylinder according to the road conditions and snowfall conditions. It can ensure that when the unit moves forward, the snow to be swept accumulates on the side of the road along the direction of the roller brush drive shaft tube, achieving a good cleaning effect.
Ensure Safety
There is a snow shield in front of the roller brush of the snowplow, which can effectively prevent the snow from splashing, avoid blocking the operator's field of vision, and ensure driving safety. On the other hand, the snow collected by the roller brush is accelerated, lifted, and thrown out.
High-Quality Sweeping Hair
The snowplow uses special sweeping hair materials with a long service life. The bristles are a mixture of polypropylene bristles and elastic steel wires and have the advantages of being wear-resistant, elastic, anti-bending, and not damaging the road surface.
FAQ
Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer with over 40 years of experience in research and development, design, and manufacturing in China.
Q 2: How long is the delivery time for bulk orders?
A4: It depends on the order quantity. Generally, the delivery time is 15 to 40 working days. Please contact us before placing an order.
Q3: Do you provide OEM/ODM services?
A4: Yes, we accept OEM/ODM.
Q4: Can I customize transportation vehicles of various models?
A4: Yes. We have the most advanced modern production equipment and manufacturing processes. We can make products according to your special requirements.
Q5: How do you guarantee quality?
A5: Yes. We strictly control the quality of raw materials and finished products according to the ISO9001 quality control system. We guarantee that all products are 100% qualified.
Q6: How will you deliver my order?
A6: Generally, different shipping methods are adopted according to the quantity, volume, and weight of the order. For orders weighing 1 to 200 kilograms, we recommend air freight. For bulk orders, we will ship by sea. It depends on the specific situation. We will compare and find the best solution.
07: What's your MOQ?
A7: One Unit Trailer or Truck.
Audited Supplier 
){kind=link}