SHOOBB Cleaning Sewage Suction Truck 6X4/China Manufacturing CLW5250GXWD6 Right-Handed Drive Sewage Suction Truck
Sewage Suction Truck
The sewage suction truck is integrated with the sanitation system, and the whole vehicle has the dual functions of sewage suction and dredging. It can ensure assembly quality and assembly consistency and is used for vacuum cleaning tank trucks to clean sewage pools or vertical pits. During operation, you can use the full-bore opening located at the rear of the tank body or any of the 450mm (18-inch) caliber traditional openings. These openings are installed on the chassis at an angle to facilitate discharge operations. Both suction and discharge operations are completed by a vacuum pump.
The overall sandblasting, spraying, and baking processes have anti-aging and corrosion resistance. The tank body is optimized by the finite element analysis method and has passed strict reliability tests. It has a front-top cylinder lifting system, a rear door hydraulic opening system, and a manual locking function. In addition, the high-pressure water system is equipped with a 60-meter high-pressure hose to achieve the dredging function and a 15-meter car wash reel. The vehicle is mainly used for loading and transporting liquid substances such as industrial hazardous waste liquids, urban sanitation sewage liquids, and construction sludge, and for unblocking sewer pipes.
The vehicle is mainly used for loading and transporting liquid substances such as industrial hazardous waste liquids, urban sanitation sewage liquids, and construction sludge, and for unblocking sewer pipes. The vehicle is mainly used for loading and transporting liquid substances such as industrial hazardous waste liquids, urban sanitation sewage liquids, and construction sludge, and for unblocking sewer pipes. It can be self-priming and self-draining, has a fast working speed, large capacity, and convenient transportation. It is suitable for unblocking, suctioning, loading, and unloading of silt in sewers.
Working Principle Of Sewage Suction Truck
Since the manure suction hose is always immersed in the liquid surface, the air in the manure tank becomes increasingly thinner after being sucked out because it cannot be replenished, causing the pressure in the tank to be lower than the atmospheric pressure. The manure liquid enters the tank through the manure suction hose under atmospheric pressure. Or because the siphon is close to the bottom of the tank, when the air is continuously discharged into the manure tank, it is compressed because it has no way out, causing the pressure in the tank to be higher than the atmospheric pressure. The manure liquid is discharged out of the tank through the siphon and the manure suction hose under the action of compressed air.
Product Parameters
| SEWAGE SUCTION TRUCK |
| Product Name |
Sewage Cleaning Truck |
| Keywords |
Sewage Suction Truck |
| Model |
CLW5250GXWD6 |
| Drive Type |
6X4 |
| Wheelbase |
4350+1350 mm |
| Body Size |
9.1 X 2.5 X 3.8 m |
| Rear Overhang |
1.48 m |
| FrontOverhang |
1.92 m |
| Total Mass |
25 T |
| Rated Load |
11.87 T |
| Front Track |
2040 mm |
| Rear Track |
1860/1860 mm |
| Displacement |
6.7L |
| Maximum Output Power |
213 kw |
| Maximum Horsepower |
290HP |
| Rated Speed |
2300 rpm |
| Tank Size |
5.5 X 2 m |
| Tank Capacity |
14.75 m3 |
| This Parameter Ls For Reference Only. The Actual Vehicle Configuration Shall Be Subject To The Actual Vehicle In The Store. |
Detailed Photos
Strong Corrosion Resistance
The tank body and metal accessories of the vehicle are phosphated before coating, and sprayed with polymer anti-corrosion primer and metal topcoat. They have strong adhesion and good corrosion resistance. They can withstand adverse environments such as humidity, dust, and salt spray. They will not crack, peel, or fade after long-term use, and can effectively prevent rust.
Multifunctional And Flexible Operation
The sewage suction truck integrates the functions of dredging, suction and reverse discharge. It is used for suction, loading and unloading of various liquid, semi-liquid and sludge, feces, wastewater and other media under various ditches. It can also be used for emergency treatment of sudden environmental pollution accidents.
Long Service Life
The vehicle has a reasonable design structure, excellent performance, and flexible and easy operation. The double anti-overflow pump device can better avoid overflow and extend the service life of the vacuum pump.
Long Endurance
Long single continuous operation time, high absolute working pressure, large flow, large suction, and long suction range.
The rear door adopts the self-patented rear door opening and closing locking device of the sanitation tank special vehicle, with a hydraulic system with safety protection.
Easy To Clean
The sewage tank level display adopts an imported level display device, which is easy to observe, disassemble, clean and maintain.
The sewage suction port and sewage discharge port both use imported knife valves to ensure the long-term airtightness of the sewage discharge valve.
Cai Body Display
FAQ
Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer with over 40 years of experience in research and development, design, and manufacturing in China.
Q 2: How long is the delivery time for bulk orders?
A4: It depends on the order quantity. Generally, the delivery time is 15 to 40 working days. Please contact us before placing an order.
Q3: Do you provide OEM/ODM services?
A4: Yes, we accept OEM/ODM.
Q4: Can I customize transportation vehicles of various models?
A4: Yes. We have the most advanced modern production equipment and manufacturing processes. We can make products according to your special requirements.
Q5: How do you guarantee quality?
A5: Yes. We strictly control the quality of raw materials and finished products according to the ISO9001 quality control system. We guarantee that all products are 100% qualified.
Q6: How will you deliver my order?
A6: Generally, different shipping methods are adopted according to the quantity, volume, and weight of the order. For orders weighing 1 to 200 kilograms, we recommend air freight. For bulk orders, we will ship by sea. It depends on the specific situation. We will compare and find the best solution.
07: What's your MOQ?
A7: One Unit Trailer or Truck.
Audited Supplier 
){kind=link}