SHOOBB Ladder Truck China Manufacturers SYR5042XJXFT6 18M Right Hand Drive Manlift Truck
Aerial Work Truck
An aerial work truck refers to a special vehicle that transports workers and equipment to the site and performs aerial work. Aerial work trucks are also called mobile lifting work platforms, which are usually used for temporary and flexible maintenance, construction work, fire evacuation, and other purposes, which are different from permanent equipment such as elevators. The workload is relatively small, usually not more than 1 ton, which is different from cranes. The working surface used for under-bridge maintenance is lower than the road surface where the work platform vehicle is located.
As a special type of work vehicle, aerial work trucks can generally be divided into four basic forms according to the form of their lifting mechanism: telescopic arm type (straight arm type), folding arm type (crank arm type), vertical lifting type, and mixed type. Further classification can be divided into scissor-type aerial work trucks, self-propelled hydraulic lifting platforms, telescopic arm aerial work trucks, crank arm aerial work trucks, cylinder aerial work trucks, etc.
The hydraulic chassis of the aerial work platform vehicle is a self-propelled aerial work platform vehicle with completely independent intellectual property rights. It adopts technologies such as electromechanical and hydraulic integration, reliability design, and computer-aided design, and successfully develops a fully hydraulically driven, self-propelled special chassis, breaking through the previous limitation that domestic aerial work platform vehicles can only be modified and designed with automobile or crane chassis.
According to the form of its lifting mechanism, it can generally be divided into four basic forms: telescopic arm type (straight arm type), folding arm type (curved arm type), vertical lifting type, and mixed type, as shown in the figure.
| AERIAL WORK TRUCK |
| Product Name |
High-Altitude Operation Truck |
| Keywords |
Aerial Work Truck |
| Model |
SYR5042XXFT6 |
| Drive Type |
4X2 |
| Wheelbase |
2800 mm |
| Maximum Operating Height |
30 m |
| Front Track |
1500 mm |
| Rear Track |
1420 mm |
| Total Mass |
4.495 T |
| Rated Load |
/ |
| Vehicle Weight |
/ |
| Number Of Cylinders |
/ |
| Maximum Horsepower |
122HP |
| Maximum Output Power |
90 KW |
| Displacement |
1.999 L |
| Number Of Gears |
5 Gears |
| Color |
Customizable |
| Tire Specifications |
185R15LT |
| Number Of Tires |
6 |
| This Parameter Ls For Reference Only. The Actual Vehicle Configuration Shall Be Subject To The Actual Vehicle In The Store. |
Lifting Function
Most folding-arm aerial work vehicles have telescopic lifting arms and built-in hydraulic brake hoisting winches. The maximum lifting capacity is 1-2 tons, which can meet the requirements of transferring heavy objects in construction environments such as landscaping and emergency rescue.
Simple Operation Method
The folding arm aerial work vehicle has a simple structure and a relatively simple operation method.
Obstacle Crossing Function
The folding arm aerial vehicle is mainly based on a two-section and three-section boom structure. Each section of the boom is hinged, and each section of the boom can be unfolded separately with a large extension angle. The small arm can be used as a flying arm, which can complete the action of exploring and crossing obstacles in the air.
Safety
The outriggers have a large span and a high safety factor; the hydraulic cylinder has a safety valve and a self-locking device, which is safe and reliable; both the upper and lower arms have travel limit devices to effectively prevent misoperation, etc.
Multifunctional And Multi-Purpose
Through the front bracket of the boom, the lifting device or manned platform can be quickly installed to realize functions such as material lifting, hoisting, and manned aerial work. At the same time, it provides an interface for expanding the working device and quickly switching various working devices.
Working Principle Of An Aerial Work Truck
The power take-off device consists of an oil pump, a power take-off device, and a flexible shaft cable. It is used to output the power of the aerial work vehicle to the oil pump and become hydraulic energy. It is through the action of the handle installed in the cab of the aerial work vehicle, through the flexible shaft cable, that the power take-off gear is engaged or separated from the power take-off output gear in the gearbox of the aerial work vehicle so that the oil pump works or stops.
1. Power take-off device
The power take-off device consists of an oil pump, a power take-off device, and a flexible shaft cable. It is used to output the power of the aerial work vehicle to the oil pump and become hydraulic energy. It is through the action of the handle installed in the cab of the aerial work vehicle, through the flexible shaft cable, that the power take-off gear is engaged or separated from the power take-off output gear in the gearbox of the aerial work vehicle so that the oil pump works or stops.
2. Rotating mechanism
The rotating mechanism consists of a hydraulic motor, a planetary gear reducer, a slewing bearing, etc. Its working principle is: that the hydraulic motor drives the reducer, and the small gear on the output shaft of the reducer rotates to push the slewing bearing to rotate the turntable.
3. Swivel joint
The swivel joint is installed at the swivel center of the turntable to solve the problem that the subframe is stationary relative to the ground and the upper part rotates during operation. It realizes the transmission of oil and electric energy from the lower vehicle to the upper vehicle. Due to the effect of the slip ring, the hydraulic pipeline and wires are not tangled.
4. Hydraulic system
The hydraulic system is supplied with oil by a main pump. The system working pressure is 14MPa and the flow rate is 25L/min. Its working pressure is adjusted by the overflow valve. The company has adjusted it before leaving the factory.
When the power take-off gear is engaged, it drives the main oil pump to operate, and the oil in the oil tank is output through the oil pump to reach the outrigger operating valve. After the outrigger operation is completed, the distribution handle is moved to the upper vehicle. At this time, the hydraulic oil is switched from the outrigger oil circuit to the upper vehicle, and the upper vehicle part can work.
Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer with over 40 years of experience in research and development, design, and manufacturing in China.
Q 2: How long is the delivery time for bulk orders?
A4: It depends on the order quantity. Generally, the delivery time is 15 to 40 working days. Please contact us before placing an order.
Q3: Do you provide OEM/ODM services?
A4: Yes, we accept OEM/ODM.
Q4: Can I customize transportation vehicles of various models?
A4: Yes. We have the most advanced modern production equipment and manufacturing processes. We can make products according to your special requirements.
Q5: How do you guarantee quality?
A5: Yes. We strictly control the quality of raw materials and finished products according to the ISO9001 quality control system. We guarantee that all products are 100% qualified.
Q6: How will you deliver my order?
A6: Generally, different shipping methods are adopted according to the quantity, volume, and weight of the order. For orders weighing 1 to 200 kilograms, we recommend air freight. For bulk orders, we will ship by sea. It depends on the specific situation. We will compare and find the best solution.
07: What's your MOQ?
A7: One Unit Trailer or Truck.
Audited Supplier 
){kind=link}