SHOOBB Efficient Asphalt Distributors 4X2 YZR5127GLQZ6 Right Handed Drive Bitumen Sprayer Truck
Asphalt Distributor Truck
An asphalt spreader refers to a tank-type special operation vehicle equipped with an insulation container, asphalt pump, heater, and spraying system for spraying asphalt; it can also be defined as road construction machinery for spraying hot asphalt, emulsified asphalt, residual oil, and other liquid asphalt; it can be widely used in road construction such as highways, urban roads, airports, ports, and reservoirs; large-capacity asphalt spreaders can also be used as asphalt carriers, mainly used for asphalt penetration method surface treatment, penetration layer, adhesive layer, on-site mixing of mixtures, asphalt stabilized soil and other construction and maintenance projects.
Asphalt spreaders are black road construction machinery that is the main equipment for the construction of highways, urban roads, airports, and ports. When using the asphalt penetration method and asphalt layer paving surface treatment method to build asphalt pavement or maintain asphalt or residual oil pavement, an asphalt spreader can be used to transport and spread liquid asphalt (including hot asphalt, emulsified asphalt, and residual oil). In addition, it can also supply asphalt binder to the loose soil on site for the construction of asphalt stabilized soil pavement or pavement base.
When constructing the permeable layer, waterproof layer, and bonding layer of the bottom layer of the high-grade highway asphalt pavement, high-viscosity modified asphalt, heavy traffic asphalt, modified emulsified asphalt, emulsified asphalt, etc. can be spread. It can also be used for asphalt overlay and spraying in highway maintenance, as well as for the construction of county and township highway oil roads for implementing layered paving technology.
The intelligent asphalt spreader consists of a vehicle chassis, an asphalt tank, an asphalt pumping and spraying system, a thermal oil heating system, a hydraulic system, a combustion system, a control system, a pneumatic system, and an operating platform.
How Asphalt Distributor Truck Works
The basic working principle of the asphalt spreader: First, add the asphalt required for construction, start the combustion and heating system, heat it through the heat transfer oil circulation, and keep it warm before working. Calculate the construction vehicle speed according to the spraying amount, calibrate the vehicle speed, calculate the asphalt pump speed, and simulate the control operation. Proofreading is completed. The asphalt pump asphalt pipeline works in a small circulation mode, setting the spraying width and asphalt pump speed. Open the nozzle rack lift it to a suitable construction height, and switch the asphalt circulation system from a small circulation to a large circulation. Start the spraying master control switch, and the asphalt will be sprayed from the nozzle rack. When the work area is completed, turn off the spraying master control. Stop spraying the asphalt, close the nozzle rack, clean the asphalt pipeline, and complete the work.
Product Parameters
| ASPHALT DISTRIBUTOR TRUCK |
| Product Name |
Asphalt Spray Truck |
| Keywords |
Asphalt Distributor Truck |
| Model |
YZR5127GLQZ6 |
| Drive Type |
4X2 |
| Wheelbase |
3800 mm |
| Body Length |
7.12 m |
| Body Width |
2.33 m |
| Body Height |
2.93 m |
| Vehicle Weight |
6.74 t |
| Rated Load |
5.06 t |
| Maximum Speed |
95 km/h |
| Number Of Cylinders |
4 Cylinders |
| Maximum Horsepower |
160HP |
| Displacement |
2.97 L |
| Rated Speed |
3000RPM |
| Tank Volume |
5.9 m3 |
| Front Axle Load |
4285 kg |
| Rear Axle Load |
7710 kg |
| Tire Specifications |
245/70r19.5 16PR |
| This Parameter Ls For Reference Only. The Actual Vehicle Configuration Shall Be Subject To The Actual Vehicle In The Store. |
Detailed Photos
Adjust The Spraying Width At Will
Manual/automatic control of the spraying amount and working width, each nozzle can be controlled separately, and the determinant nozzle can be freely combined to adjust the spraying width at will. Spraying control can be performed in the cab or the rear platform.
Intelligent Operation
The automatic control system of the asphalt spreader can measure the vehicle speed and automatically calculate the number of revolutions of the asphalt pump according to the input spreading amount, spraying width, and asphalt type, and then automatically adjust the number of pumps of the asphalt pump through the system.
Long Life
Flush nozzle This system can blow out the remaining asphalt in the nozzle through diesel and high-pressure air to prevent the asphalt from freezing in the nozzle and increase the service life of the nozzle. The vehicle-mounted rapid heating system (10-15ºC/h) can improve the heating efficiency and reduce the construction auxiliary time to ensure the spreading temperature.
Realize Double And Multiple Spraying
The asphalt spraying rod adopts a three-section folding structure. Double or multiple spraying can be achieved by moving the spraying rod up and down. The spraying range can be expanded by moving the spraying rod left and right, and obstacles can be effectively avoided.
Safe And Reliable
All heat pipes have thermal insulation layers on the outside to reduce heat dissipation and avoid scalding operators. The asphalt tank is equipped with a sedimentation and drainage tank and is equipped with a liquid-level display, alarm, and safety devices.
Asphalt Distributor Truck Structure
Asphalt tank
It consists of an inner tank, insulation material, an outer shell, a partition, a combustion chamber, an asphalt pipeline in the tank, a thermal oil pipeline, a gas cylinder, a refueling port, a capacity meter, a decorative plate, etc. The tank body is an elliptical cylinder, and the inner and outer layers are welded by steel plates. The space between the two layers is filled with aluminum silicate insulation material with a thickness of 50 to 100 mm and is covered with stainless steel plates. There is a sink at the bottom to facilitate the asphalt in the tank to be completely sucked out. There are 5 mounting feet at the bottom of the tank body that are welded to the sub-beam and then fixed to the frame. The outer layer of the combustion chamber is the thermal oil heating chamber, and a row of thermal oil heating pipes are installed at the bottom. The capacity meter is used to indicate the level of asphalt in the tank.
Power transmission system
It consists of a power take-off, a pump transmission device, a hydraulic system, etc. Generally, the power output of the power take-off installed on the chassis engine or the transmission output port drives the hydraulic pump to provide the necessary power for the asphalt spreading device. The hydraulic system consists of a hydraulic pump, a relief valve, a reversing valve, a hydraulic motor, a hydraulic pipeline, etc.
Asphalt pump and pipeline system
It consists of an asphalt pump, a filter, a valve, a spray pipeline, a cylinder nozzle assembly, etc. The flow direction of liquid asphalt in the pipeline is controlled by different combinations of valves. The main functions are as follows: self-priming asphalt filling, rear pipe spraying, portable nozzle spraying, circulation, back suction, cleaning, etc.
Asphalt heating and thermal oil system
It consists of a combustion heating system and a thermal oil circulation heating system. (5) Asphalt pipeline cleaning system
There are two parts: diesel cleaning and high-pressure air flushing. The diesel cleaning part consists of a diesel tank, a copper ball valve for oil inlet, and pipelines, and the high-pressure air flushing part consists of an air storage cylinder, a check valve, an air valve, etc.
Electrical and control system
The electrical control system is divided into two parts: a DC circuit and an AC circuit. The DC circuit consists of a power take-off, a reducer, a cooler, a hydraulic reversing valve, a rear nozzle lifting and lowering, a rear working light control circuit, and an automatic control system circuit; the AC circuit consists of a generator, a burner, and a thermal oil motor circuit.
Cai Body Display
FAQ
Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer with over 40 years of experience in research and development, design, and manufacturing in China.
Q 2: How long is the delivery time for bulk orders?
A4: It depends on the order quantity. Generally, the delivery time is 15 to 40 working days. Please contact us before placing an order.
Q3: Do you provide OEM/ODM services?
A4: Yes, we accept OEM/ODM.
Q4: Can I customize transportation vehicles of various models?
A4: Yes. We have the most advanced modern production equipment and manufacturing processes. We can make products according to your special requirements.
Q5: How do you guarantee quality?
A5: Yes. We strictly control the quality of raw materials and finished products according to the ISO9001 quality control system. We guarantee that all products are 100% qualified.
Q6: How will you deliver my order?
A6: Generally, different shipping methods are adopted according to the quantity, volume, and weight of the order. For orders weighing 1 to 200 kilograms, we recommend air freight. For bulk orders, we will ship by sea. It depends on the specific situation. We will compare and find the best solution.
07: What's your MOQ?
A7: One Unit Trailer or Truck.
Audited Supplier 
){kind=link}